System information

3. Commands
3-44 July 2004 4821-A2-GB21-00
Configure Interface DSL Profile Line Rate Adaptive Downstream
Configure Interface DSL Profile Line Rate Adaptive Upstream
configure interface dsl-profile-line rate-adaptive-downstream {manual | init | dynamic}
{profile_name | all}
Minimum Access Level: Administrator
The configure interface dsl-profile-line behavior downstream command specifies whether the port
will adapt its rate to downstream line conditions.
profile_name – Identifies the ADSL profile to be modified.
rate-adaptive-mode – Valid choices are:
manual - Manually selected at startup
init - Automatically selected at startup
dynamic - Automatically selected at run time
Example:
PDYN# configure interface dsl-profile-line rate-adaptive-downstream init adsl_profile1
configure interface dsl-profile-line rate-adaptive-upstream {manual | init | dynamic} {profile_name}
Minimum Access Level: Administrator
The configure interface dsl-profile-line behavior upstream command specifies whether the port will adapt
its rate to upstream line conditions.
profile_name – Identifies the ADSL profile to be modified.
rate-adaptive – Valid choices are:
manual - Manually selected at startup
init - Automatically selected at startup
dynamic - Automatically selected at run time
Example:
PDYN# configure interface dsl-profile-line rate-adaptive-upstream dynamic adsl_profile1