System information

3. Commands
4821-A2-GB21-00 July 2004 3-41
Configure Interface DSL Profile Line Max-Speed-Downstream
Configure Interface DSL Profile Line Max-Speed-Upstream
configure interface dsl profile-line max-speed-downstream {rate} {profile_name}
Minimum Access Level: Administrator
The configure interface dsl-profile-line max-speed-downstream command specifies the maximum
rate, in kbps, available for traffic from the port toward the CPE. If behavior is set to fixed, this is the only
downstream rate.
profile_name – Identifies the ADSL profile to be modified.
rate – Valid rates are:
For G.dmt and ANSI: 64 to 12000 kbps in 32 kbps increments.
For G.lite: 64 to 4000 kbps in 32 kbps increments.
Example:
PDYN# configure interface dsl-profile-line max-speed-downstream 2176 adsl_profile1
configure interface dsl max-speed-upstream {rate} {profile_name}
Minimum Access Level: Administrator
The configure interface dsl-profile-line max-speed-upstream command specifies the maximum rate,
in kbps, available for traffic toward the port from the CPE. If behavior is set to fixed, this is the only
upstream rate.
profile_name – Identifies the ADSL profile to be modified.
rate – Valid rates are:
For G.dmt and ANSI: 32 to 1024 kbps in 32 kbps increments.
For G.lite: 32 to 1024 Kbps in 32 kbps increments.
Example:
PDYN# configure interface dsl-profile-line max-speed-upstream 128 adsl_profile1