System information

3. Commands
4821-A2-GB21-00 July 2004 3-37
Configure Interface DSL Profile Line Create
Configure interface dsl-profile-line create {profile_name }
Minimum Access Level: Administrator
The configure interface dsl-profile-line create command creates a new ADSL Line Profile.
profile_name – Identifies the ADSL profile to be created.
This profile contains the following line parameters:
Latency - Select the channel the following rates are effective for: Fast or Interleaved.
Downstream / Near End Profile
-----------------------------------------
max-speed-downstream -- maximum rate 0 to 65535.
min-speed-downstream --Enter a minimum rate from 0 to 65535.
max-interleave-delay-downstream - Max delay allowed for the interleaved channel, in ms.
max-snr-margin-downstream - Max Noise Margin Select the maximum noise margin.
min-snr-margin-downstream - Min Noise Margin Select the maximum noise margin.
target-snr-margin-downstream - Target noise margin.
rate-adaptive-mode-downstream - Rate adaptive mode (Manual, Init, Dynamic)
Upstream / Far End Profile
-----------------------------------
max-speed-upstream -- maximum rate 0 to 65535.
min-speed-upstream --Enter a minimum rate from 0 to 65535.
max-interleave-delay-upstream - Max delay allowed for the interleaved channel, in ms.
max-snr-margin-upstream - Max Noise Margin Select the maximum noise margin.
min-snr-margin-upstream - Min Noise Margin Select the maximum noise margin.
target-snr-margin-upstream - Target noise margin.
rate-adaptive-mode-upstream - Rate adaptive mode (Manual, Init, Dynamic)
Example:
PDYN# configure interface dsl-profile-line create adsl_profile1