System information

3. Commands
4821-A2-GB21-00 July 2004 3-35
Configure Interface DSL Profile Alarm Upstream Init Failure
Configure Interface DSL Profile Alarm Upstream Unavailable Seconds
Configure interface dsl-profile-alarm upstream-init-failure {yes | no} {profile_name }
Minimum Access Level: Administrator
The configure interface dsl-profile-alarm upstream-decreasing-rate command modifies the
upstream init failure to generate an alarm.
profile_name – Identifies the ADSL Alarm profile to be modified.
Yes - Enable Initialization Failure Trap messages as specified in RFC 2662.
No - Disable Initialization Failure Trap messages as specified in RFC 2662.
Example:
PDYN# configure interface dsl-profile-alarm upstream-init-failure yes adsl_alarm_profile1
Configure interface dsl-profile-alarm upstream-uas {uas} {profile_name }
Minimum Access Level: Administrator
The configure interface dsl-profile-alarm upstream-uas command modifies the upstream unavailable
seconds required to generate an alarm.
profile_name – Identifies the ADSL Alarm profile to be modified.
uas - SNMP trap is sent if the number of UAS events in a 15-minute interval meets or exceeds the
selected value (0–900 seconds, where 0 disables the messages).
Example:
PDYN# configure interface dsl-profile-alarm upstream-uas 500 adsl_alarm_profile1