System information

3. Commands
4821-A2-GB21-00 July 2004 3-23
Configure Interface DSL Linkupdown Trap
Configure Interface DSL Name
configure interface dsl {port_id} linkupdown-trap {disabled | enabled}
Minimum Access Level: Administrator
The configure interface dsl linkupdown-trap command specifies whether an SNMP trap should be
sent upon link up and link down events.
port_id – Identifies the port to be configured.
linkupdown-trap – Valid choices are:
– disabled – No traps are sent upon link up and link down events.
– enabled – A trap is sent upon a link up or link down event. This is the default.
Example:
PDYN# configure interface dsl 1/21 linkupdown-trap disabled
configure interface dsl {port_id} name {port_name}
Minimum Access Level: Administrator
The configure interface dsl name command specifies a unique name for this port.
port_id – Identifies the port to be configured.
name – May be up to 16 printable characters. The name may not include a forward slash (/) or the
restricted keywords. See Reserved Names in Chapter 1, System Concepts.
Example:
PDYN# configure interface dsl 1/22 name Room_100