System information

3. Commands
3-22 July 2004 4821-A2-GB21-00
Configure Interface DSL Line-Mode
configure interface dsl {port_id} line-mode {ansi | dmt | g.lite | multimode}
Minimum Access Level: Administrator
The configure interface dsl line-mode command specifies the line code for a ADSL port.
port_id – Identifies the port to be configured. .
line-mode – Valid choices are:
ansi – The port uses ANSI T1.413-1998.
dmt – The port uses G.dmt (G.992.3).
g.lite – The port uses G.lite (G.992.4).
multimode – The port automatically senses the line code in accordance with G.994.1. This is the
default.
Example:
PDYN# configure interface dsl 1/24 line-mode ansi