System information

3. Commands
3-18 July 2004 4821-A2-GB21-00
Configure Interface Console Show
Configure Interface Console Stop Bits
configure interface console show
Minimum Access Level: Administrator
The configure interface console show command displays parameters for the Console port without
leaving configuration mode.
Example:
PDYN# configure interface console show
Output: refer to Show Interface Console.
configure interface console stop-bits {1 | 2}
Minimum Access Level: Administrator
The configure interface console stop-bits command sets the number of stop bits delimiting a byte on
the Console port.
stop-bits – Valid choices are 1 and 2. The default is 1.
Example:
PDYN# configure interface console stop-bits 1