System information

3. Commands
3-16 July 2004 4821-A2-GB21-00
Configure IGMP Proxy Enable
Configure IGMP Proxy Report Summary Enable
Configure Interface
This command enters ‘configure interface’ mode. From this level, any of the
following interfaces may be selected.
 console
 dsl
 ethernet
configure igmp-proxy {enabled | disabled}
Minimum Access Level: Administrator
The configure igmp proxy command enables the additional function where the unit creates IGMP
query messages.
enabled – The unit will act as an IGMP querier if needed. In addition the proxy function will perform
quick query functions that allows a smooth changing of data streams. The IGMP Snooping function
must also be enabled for this function to be enabled.
disabled – The unit will relay all IGMP messages and not perform any proxy functions.
Example:
PDYN# configure igmp proxy enabled
configure igmp-proxy report-summary {enabled | disabled}
Minimum Access Level: Administrator
The configure igmp proxy report-summary command enables the unit to summarize all report
messages into a single report message.
enabled – The IGMP proxy agent will summarize all report messages into a single report message.
disabled – All report messages received by the IGMP Proxy agent will be forwarded upstream towards
the active IGMP Querier.
Example:
PDYN# configure igmp-proxy report-summary disabled