Manualshelf

System information

ManualsBrandsZhone ManualsComputer equipment4821-A2
151152153154155156157158159160
Table Of Contents
3. Commands
3-136 July 2004 4821-A2-GB21-00
Test
Test LEDs Start
Test LEDs Stop
test leds start
Minimum Access Level: User
The test leds start command causes all Light-Emitting Diodes (LEDs) on the front panel of the
unit to turn on. See the Installation Guide for the locations of all LEDs. Verify that all LEDs are lit.
If an LED does not light up during the LED test, notify your service representative.
Example:
PDYN# test leds start
test leds stop
Minimum Access Level: User
The test leds stop command causes stops the led test.
Example:
PDYN# test leds stop