System information

3. Commands
3-130 July 2004 4821-A2-GB21-00
Show System Status
show system status
Minimum Access Level: User
The show system status command shows the state of alarms throughout the system.
Example (24-port model):
PDYN>show system status
Status Up
Name xxxxxxxxxxx
Location xxxxxxxxxxxxxxxx
Contact xxxxxxxxxxxxxxxxxx
Up Time ddd:hh:mm
selftest pass
fan 1 alarm
fan 2 alarm
internal temperature alarm (99 C)
Ethernet Ports eth1 eth2
up up
DSL Links 1 2 3 4 5 6 7 8 9 10 11 12
Status D . U . U U U U . D D D
13 14 15 16 17 18 19 20 21 22 23 24
U U U U U U U U U U U U
Display results:
selftest – The result of the power-on self-test (fail or pass).
uplink – The state of the uplink (blank or alarm).
fan n – The state of the fans 1-2 (blank or alarm).
temperature – The system intake and internal temperature, in Centigrade. If there are multiple
sensors, this will be the temperature sensor that is most out of range.
Under DSL port numbers 1–24 is one of the following:
– D: Port is down.
– U: Port is up.
– . (period): Port is disabled.