System information

3. Commands
4821-A2-GB21-00 July 2004 3-125
Show SNTP
show sntp
Minimum Access Level: User
The show sntp command displays the configuration parameters for SNTP.
Example:
PDYN>show sntp
state enabled
ip address xxx.xxx.xxx.xxx
interval 24 hours
PDYN>
Display results:
state – Whether the unit makes SNTP requests:
– disable – The unit does not make SNTP requests.
– enable – The unit updates the date and time periodically by sending requests to an
SNTP server.
ip address – The address defined for the SNTP server.
interval – The number of hours between SNTP requests.