System information

3. Commands
3-114 July 2004 4821-A2-GB21-00
Show Interface Ethernet Clear Statistics
Show Interface Ethernet Configuration
show interface ethernet {port_id} clear-statistics
Minimum Access Level: User
The show interface ethernet clear-statistics command resets statistics for all Ethernet ports or a
specified port.
port_id – Specifies that the display should be limited to this specified port. If all is specified, information
is displayed for all Ethernet ports.
clear-statistics – Resets to zero the statistics for this session. This affects only the statistics displayed
using the show command during this session. All statistics continue to be maintained.
Example:
PDYN# show interface ethernet eth1 clear-statistics
show interface ethernet {port_id} configuration
Minimum Access Level: User
The show interface ethernet configuration command displays configuration information for all
Ethernet ports or a specified port.
port_id – Specifies that the display should be limited to this specified port. If all is specified,
information is displayed for all Ethernet ports.
configuration – Specifies that the port’s configuration should be displayed.
Example:
PDYN# show interface ethernet eth2 configuration
flow-controlenabled
mode manual
rate 10fulldup
xover mdi
pvid 125
priority 1
acceptable-frame-typeall
ingress-filteringenabled