System information

3. Commands
3-112 July 2004 4821-A2-GB21-00
Show Interface DSL Status
show interface dsl {port_id} status
Minimum Access Level: User
The show interface dsl status command displays the status for the specified ADSL port.
port_id – Specifies that the display should be limited to this specified port.
Example:
PDYN# show interface dsl 1/2 status
link status Up
link up time ddd hh:mm:ss
transmission mode dmt
latency interleaved
near end alarm state OK
far end alarm state OK
ADSL status: Near End Far End
rate (Kbps) xxxxx xxxxx
attainable rate (Kbps) xxxxx xxxxx
previous rate xxxxxx xxxxxx
margin (dB) xx xx
attenuation (dB) xx xx
current transmit power (dB) xx xx
ADSL line init attempts xxx