System information

3. Commands
3-108 July 2004 4821-A2-GB21-00
Show Interface DSL Rates
show interface dsl {port_id} rates
Minimum Access Level: User
The show interface dsl rates command displays the data rate for all ADSL ports.
port_id – Must be all all.
rate – Specifies that the current rate of the specified port should be displayed.
Example:
PDYN# show interface dsl all rates
PORT UP DOWN PORT UP DOWN
1 1000 12000 13 1000 12000
2 1000 12000 14 1000 12000
3 1000 12000 15 1000 12000
4 1000 12000 16 1000 12000
5 1000 12000 17 1000 12000
6 1000 12000 18 1000 12000
7 1000 12000 19 1000 12000
8 1000 12000 20 1000 12000
9 1000 12000 21 1000 12000
10 1000 12000 22 1000 12000
11 1000 12000 23 down down
12 1000 12000 24 down down
PDYN>_
Display results:
Line Rate Up – The upstream data rate of the link is up.
If the link is down, one of the following will be displayed:
– Dsbl – The port is administratively disabled.
– Down – The link is down.
Line Rate Down – The downstream data rate.
If the link is down, one of the following will be displayed:
– Dsbl – The port is administratively disabled.
– Down – The link is down.