System information

3. Commands
3-104 July 2004 4821-A2-GB21-00
Show Interface DSL Configuration
show interface dsl {port_id} configuration
Minimum Access Level: User
The show interface dsl configuration command displays information about all ADSL ports or a
specified ADSL port.
port_id – Specifies that the display should be limited to this specified port. If all is specified,
information is displayed for all ports.
configuration – Specifies that the port’s configuration should be displayed.
Example:
PDYN# show interface dsl 1/1 configuration
name room_101
state enabled
line length (kft) 10
transmission mode multimode
latency interleaved
linkupdown-trap enabled
pwrmgmt-state enabled
pwrmgmt-enabling idle
l0-time 10
l2-time 10
Line Profile Name ADSL_LINE_PROFILE
Alarm Profile Name ALARM_PROFILE
Upstream Downstream
behavior adaptive adaptive
max-speed (kb/s) 1000 12000
min-speed (kb/s) 64 256
target-margin (dB) 3 15
min-snr-margin (dB) 0 0
max-snr-margin (dB) 6 6
max transmit power (dBm) 1 1
max interleave delay (ms) 16 16
P-G VCC Encap VLAN
1 0/35 llc-bridged 0001,0002, 0003,0004, 0005, 0006, 0007, 0008
3 1/92 llc-bridged 0092
4 0/40 llc-bridged 0140
Priority Group 1 2 3 4
queuing method fifo fifo fifo fifo
pvid 001 001 001 001
priority 0 0 0 0
acceptable-frame-type all all all all
ingress-filtering disabled disabled disabled disabled