System information

3. Commands
3-100 July 2004 4821-A2-GB21-00
Show Filter
show filter [filter_name]
Minimum Access Level: User
The show filter command displays configured data filters.
filter_name – Specifies that the display should be limited to a single filter.
Example:
PDYN>show filter
rule1 discard
rule-name type action frame rule
rule1 ether discard dix AAE
rule2 forward
rule-name type action frame rule
rule2 ether discard dix 660
PDYN>show filter rule1
rule1 discard
rule-name type action frame rule
rule1 ether forward dix aae
Display results:
filter-name – The name of the filter.
action – The action to be performed:
forward – Specifies that a packet is to be forwarded to the user when none of the conditions
specified in the rule or rules are matched.
discard – Specifies that a packet is to be discarded when none of the conditions specified in
the rule or rules are matched.
rule-name – The name assigned to the rule or rules associated with this filter.
type – The rule type:
ether – The rule is based on Ethertypes.
action – The action to perform if the rule is satisfied:
forward – The packet is forwarded.
discard – The packet is discarded.
frame – DIX or SNAP ether frame type.
rule – The rule criteria:
The Ethertypes the rule affects.