System information

3. Commands
3-94 July 2004 4821-A2-GB21-00
Firmware Switch
Paging
firmware switch
Minimum Access Level: Administrator
The firmware switch command loads and executes the alternative firmware file. This also resets
the unit.
Example:
PDYN# firmware switch
Switch from firmware revision 01.02.03 to firmware revision 01.02.04? (yes/no) yes
Firmware switched, system rebooting
PDYN#
paging {disabled | enabled}
Minimum Access Level: User
The paging command determines how a full screen of output is displayed. The selection affects
only the user who enters the command.
disabled – Specifies that output is sent to the screen without interruption.
enabled – Specifies that when 23 lines of output have been sent to the screen, a More prompt is
displayed on line 24. When More is displayed, you can:
Press the space bar to view the next screen of output
Press the Enter key to view the next line of output
Press the “q” key to return to the command line.
Example:
PDYN>paging enabled