System information

3. Commands
3-90 July 2004 4821-A2-GB21-00
Copy Startup Configuration to Running Configuration (Reload)
End
copy startup-config running-config
Minimum Access Level: Administrator
The copy startup-config running-config command loads the startup configuration file to
running configuration.
startup-config – Specifies that the source file is the configuration in non-volatile memory.
running-config - Specifies the running configuration (volatile memory) is the source file.
Example:
PDYN# copy startup-config running-config
end
Minimum Access Level: User
The end command terminates a privileged mode session and continues the session in standard
mode. If the end command is executed by a user not in privileged mode, it places the user at the
top of the command tree like one or more back commands.
Example:
PDYN# end
You are ending your privilege mode session
PDYN>_