System information

3. Commands
4821-A2-GB21-00 July 2004 3-79
Configure Uplink Tagging Base
Configure Uplink Tagging Index
The following tables summarizes the range of VLAN tags for a unit based on the
base and index.
configure uplink-tag base {base}
Minimum Access Level: Administrator
The configure uplink-tag base command determines the base value to be used for setting
VLAN tags for the DSL ports.
base – Specifies the base value used in setting the range of VLAN tags.
The valid values are: 16, 256, 512, 768, 1024, 1280, 1536, 1792, 2048, 2304, 2560, 2816, 3072,
3328, 3584, 3840.
The default is 16.
Example:
PDYN# configure uplink-tag base 1024
configure uplink-tag index {index}
Minimum Access Level: Administrator
The configure uplink-tag index command determines the index value to be used for setting
VLAN tags for the DSL ports.
index – Specifies the index value used in setting the range of VLAN tags. Valid values are 1–10.
The default is 1.
Example:
PDYN# configure uplink-tag index 2
Base
VLAN Tag
Index 1
ULT Tags
Index 2
ULT Tags
Index 3
ULT Tags
Index 4
ULT Tags
Index 5
ULT Tags
16 (x’0010’) 16 – 39 40 - 63 64 - 87 88 - 111 112 - 135
256 (x'0100')
256 – 279 280 – 303 304 – 327 328 – 351 352 – 375
512 (x'0200')
512 – 535 536 – 559 560 – 583 584 – 607 608 – 631
768 (x'0300')
768 – 791 792 – 815 816 – 839 840 – 863 864 – 887