System information

3. Commands
3-78 July 2004 4821-A2-GB21-00
Configure System Options Spectrum Management
Configure System Options Test Timeout
Configure Uplink-Tag
This command is used to configure the unit for Uplink Tagging. In the Uplink
tagging mode, the data from each DSL port is assigned a unique VLAN tag.
These commands set the base VLAN tag, and an index. With just these two
commands, the VLAN tag for every DSL port in the unit is defined. The factory
default is 16 for the base and an index of 1.
configure system options spectrum-management {enabled | disabled}
Minimum Access Level: Administrator
The configure system options spectrum management command specifies whether the
system enables the spectrum management capability.
Example:
PDYN# configure system options spectrum-management enabled
configure system options test-timeout {time}
Minimum Access Level: Administrator
The configure system options test-timeout command specifies the maximum amount of time a
disruptive test is allowed to run.
time – Specifies the amount of time in minutes a disruptive test can run before it is terminated.
The valid range is 1–30. The default is 5 minutes.
Example:
PDYN# configure system options test-timeout 2
Note that currently there are no disruptive tests defined for this product.