Installation manual

Index-13000-A2-GA31-F0 March 2001
Index
Numbers
24-port
50-pin modular plug, A-4
DTE interface assembly, 5-5–5-6
NIM, 4-7–4-8
cable, 4-7
interface connection, A-2–A-3
2-wire switched 56 kbps, NIM, 4-5
interface connection, A-2
4-wire switched 56 kbps, NIM, 4-5
interface connection, A-2
6-port, connector module, 5-4
A
address, setting for carrier, 2-17
alarm output, connection, 2-15–2-16
analog, network interface, 4-3–4-4
async terminal, COM port connection, B-5–B-6
auxiliary backplane. See T1 auxiliary backplane
B
brackets, for carrier, 2-4
C
cable
50-pin connector, A-1
EIA-232-D crossover, B-9
cable retainer, for T1 auxiliary backplane, 3-4
carrier
assembly, 1-1–1-2
backplane connectors, A-7
brackets, 2-4
components, 1-2, 2-2
device arrangement, 4-2
equipment, 2-2–2-4
equipment list, D-3–D-6
installing in cabinet, 2-4–2-6
setting address, 2-17
technical specifications, C-1–C-6
CC, SDU DIP switch, 2-18
CC IN/CC OUT
SDU interface connection, A-3
SDU jack, 2-17–2-19
circuit card, installation, 5-1–5-8
COM port, interface, B-5–B-6
components, carrier, 1-2
connection
alarm output, 2-15–2-16
network, A-1
NMS, 2-21–2-23
NMS/SDU, A-3
SDU front panel, 2-20
SGRD/FGRD, 2-14
T1 COM port, 3-6
connector
carrier backplane, A-7
circuit card interface, 5-2
EIA-530-A, DB25 port interface, B-6
interface, 4-3
module installation, 5-4, 5-5
NIM, 4-4–4-6
rear plate, 5-3
RS-449 port interface, B-7
T1
auxiliary backplane, B-1–B-2
channel extension cable, B-10
DTE interfaces, 3-5
external clock, B-10
network interface, 3-5, B-3
V.35 adapters, 3-5
V.35 port interface, B-8
control interface
dial modem, 2-16
D-lead, A-8
cooling requirements, fan module, 2-11
D
DB25 port interface, EIA-530-A, B-6
DC, SDU DIP switch, 2-18
DC OUT/DC IN, SDU jack, 2-17–2-19
devices, in carrier, 4-1–4-2
diagnostic channel, extension for T1, B-10
dial, NIM, A-2
dial modem, control interface, 2-16
digital
network connections, A-1
network interface, 4-3–4-4