User`s guide

22
S-REGISTERS (continued)
Register Description Factory Setting Range
S77 DTR Alarm Reporting 0 0=Disable; 1=Enable
S78 Dial Automode 0 0=Enable; 1=Disable; 2=System85
S80 No Data Disc Trigger Signal 3 0=RX or TX; 1=TX; 2=RX; 3=TX and RX
S82 Leased Autorate 0 0=Enable; 1=Disable
S83 MI/MIC Dialing 0 0=Disable; 1=Enable
S84 AT Command Mode 0 0=Normal; 1=No Error; 2=No Strap or ERROR
S85 Fast Disconnect 0 0=Disable; 1=Enable
S88 Straps When Disconnected 0 0=No Change; 1=Reload; 2=Reload, No Change
S89 V.42 ARQ Window Size Increase 0 0(6 frames) – 9(15 frames)
S90 DTE Rate = VF Rate 0 0=Disable; 1=Enable
S91 Cellular Enhancement (if ETC installed) 0 0=Disable; 1=Enable
S92 V.29 Train On Data (if V.29 installed) 0 0=Disable; 1=Enable
S93 RJ11 Cellular Adapt (if ETC installed) 0 0=Disable; 1=Enable