User`s guide

19
RESULT CODES
Numbers(1) Numbers(2) Words
0 0 OK
1 1 CONNECT
2 2 RING
3 3 NO CARRIER
4 4 ERROR
Result Codes 5–14, 16, 19 are enabled with the X1,
X2, X3, and X4 commands.
5 5 CONNECT 1200
6 6 NO DIALTONE
7 7 BUSY
8 8 NO ANSWER
10 10 CONNECT 2400
11 11 CONNECT 4800
12 12 CONNECT 9600
13 16 CONNECT 12000
14 13 CONNECT 14400
15 14 CONNECT 19200
16 15 CONNECT 7200
17 17 CONNECT 16800
19 1 CONNECT 300
Result Codes 20–27, 29, and 37–48 are enabled
with the X5 command (EC suffix) or the X6
command (V.42 or MNP suffix).
20 10 CONNECT 2400/EC
21 11 CONNECT 4800/EC
22 12 CONNECT 9600/EC
23 16 CONNECT 12000/EC
24 13 CONNECT 14400/EC
25 17 CONNECT 16800/EC
26 15 CONNECT 7200/EC
27 5 CONNECT 1200/EC
29 14 CONNECT 19200/EC
37 37 CONNECT 21600
38 38 CONNECT 24000
39 39 CONNECT 26400
40 40 CONNECT 28800
41 41 CONNECT 31200
42 42 CONNECT 33600
43 43 CONNECT 21600/EC
44 44 CONNECT 24000/EC
45 45 CONNECT 26400/EC
46 46 CONNECT 28800/EC
47 47 CONNECT 31200/EC
48 48 CONNECT 33600/EC
Result Codes 15, 28–34 are enabled with the X7
command (DTE rate suffix).
28 28 CONNECT 38400
30 30 CONNECT 57600
32 32 CONNECT 76800
34 34 CONNECT 115200
DIAL COMMAND MODIFIERS
T Tone Dial (DTMF)
P Pulse Dial
, Pause
W Wait for Dial Tone
R Reverse Dial
@ Quiet Answer
! Hook Flash
; Return to Command Mode