User`s guide

COMSPHERE 3800 Series Modems
3-2 September 1998 3810-A2-GB93-30
Configuration Table
Table 3-1 describes configuration options that are different for 3800 Series modems installed in
Japan or new with the firmware release of the modem accompanying this document.
Table 3-1
(1 of 3)
Configuration Options for Japan
Factory Defaults
Factory Default Templates for Cellular
If Enhanced Throughput Cellular (ETC) is installed, the AT command &F5 or the front
panel selection Cellular (Mobile) sets the following configuration options:
Option AT Command Value
Maximum Frame Size \A4
Error Control Mode \N4
Auto-Answer Rings S0=3
No Answer Timeout S7=45
No Carrier Disconnect S10=100
V.32bis Train S43=1
V.32bis Autorate S76=3
V.42 ARQ Window Size S89=9
Cellular Enhancements S91=1
If ETC is installed, the AT command &F6 or the front panel selection Cellular (PSTN) sets
the following
configuration options:
Option AT Command Value
Transmit Level &I15
Error Control Mode \N4
No Answer Timeout S7=45
No Carrier Disconnect S10=100
V.32bis Train S43=1
V.42 ARQ Window Size S89=9
Cellular Enhancements S91=17