user manual

Zhone Technologies / A-31
Alphabetical Reference Error messages
QUERYHALARM
Displays a list of history alarms.
REBOOT
Reboots the system.
TFTPDLD
This command initiates a TFTP download. It prompts for the IP address of the server, the code
bank to download the image to, and the filename of the software image.
A.3 Error messages
Table A-3 describes the error messages.
Table A-3. Error messages
Message Explanation
FDL mgmt not supported
on this wan
Tried to activate FDL on WAN 2. Only WAN 1 supports IP over
FDL.
Invalid instance number.
Valid range is 1-16
Invalid index for a static route.
Invalid Loopback Loopback activated while another loop back (either local or remote)
is active.
Invalid MTU size valid
range is 128-1500
Invalid MTU size.
Invalid parameter value Invalid parameter value in SET command.
Invalid time slot valid
range is 1-24
Tried to assign invalid TS.
Invalid Wan Number Tried to enter an invalid WAN number.
IP broadcast address
cannot be used
User tried to assign broadcast IP address. The Z-Plex unit does not
support broadcast IP addresses.