user manual

Zhone Technologies / A-29

Alphabetical Reference Parameter reference

TYPE

Type of T1 interface. Possible values are:

• DSX: Z-Plex presents DSX characteristics.

• CSU: (default) Z-Plex presents CSU characteristics.

Configuration group: T1CFG

Syntax:

(GET/SET) T1CFG:TYPE:X:(CSU/DSX)

UAS

UAS (unavailable second): indicates the total number of seconds during which service is

unavailable. An unavailable signal state is declared after ten consecutive SESs are logged. An

unavailable state is cleared after ten consecutive non-SESs are logged. Unavailable Seconds

are also accumulated if the card has an out-of-service (OOS) condition.

Configuration group: PMCUR, PMTOT, PMINT, FARPMCUR,FARPMTOT, FARPMINT

Syntax:

GET (PMCUR, PMTOT, FARPMCUR, FARPMTOT):UAS:x

Syntax: GET (PMINT, FARPMINT):UAS:x:(0-95)

WAN

Species the T1 interface whose data is sent out the V.35 port.

Possible values are:

• 1 (default)

• 2

Configuration group: DPCFG

Syntax:

(GET/SET) DPCFG:WAN:1:(1/2)

WAN (FXO)

The T1 WAN interface used to provide FXO service. The default is WAN 1.

Configuration group: FXOCFG

Syntax:

(GET/SET) FXOCFG:WAN:n:(1/2)