user manual

A-10 \ Zhone Technologies
Model No.
Running Head
Parameter reference Alphabetical Reference
• WAN 2 does not support FDL.
Configuration group: T1CFG
Syntax:
(GET/SET) T1CFG:FDL:X:(ANSI/ATT/OFF)
FDL_IP
Specifies whether the FDL over IP management interface is enabled. FDL is a 4 Kbps channel
normally used to manage the T1 link. When the FDL is used to carry management data, it is
no longer able to carry T1 management data.
Possible values are:
• ON
• OFF (default)
Configuration group: T1CFG
Syntax:
(GET/SET) T1CFG:FDL_IP:X:(ON/OFF)
FRAME
Specifies T1 framing and data link format. ESF frame format requires FDL to be set. Possible
values are:
• D4
(No data link selection required with D4 setting)
• ESF (default): If ESF is selected, FDL messaging type must also be selected (and will
invoke additional setting options, such as AT&T or ANSI).
• SLC96
Notes
• WAN 2 does not support SLC96.
Configuration group: T1CFG
Syntax:
(GET/SET) T1CFG:FRAME:X:(D4/ESF/SLC96)
HDLC
Possible values are:
• HDR_ON (default)
• HDR_OFF