user manual

Zhone Technologies / 4-17
Configuring the Z-Plex System maintenance commands
4.10.6 Activating code in bank 1
To activate the code in bank 1, enter the following command:
user> ACTIVEBANK1
4.10.7 Activating code in bank 2
To activate the code in bank 2, enter the following command:
user> ACTIVEBANK2
4.10.8 TFTP downloading
To download software via TFTP to the Z-Plex unit, enter the following command:
user> TFTPDLD
This command initiates a TFTP download. It prompts for the IP address of the server, the code
bank to download the image to, and the filename of the software image.