user manual

4-16 \ Zhone Technologies
Model No.
Running Head
System maintenance commands Configuring the Z-Plex
BANK2
->Software version : ZPLEX10_1.0.0#6
->Checksum : 0x50a78d4c
Active bank is 1
4.10.3 Displaying timeslot usage
To display information about the T1 timeslot usage, enter the following command:
user> QUERYTS
TS 24, WAN 1, SERVICE IP
4.10.4 Displaying list of alarms
To display information about the active alarms, enter the following command:
user> QUERYALARM
There are no Active Alarms
4.10.5 Displaying and clearing list of history alarms
To display information about the history alarms, enter the following command:
user> QUERYHALARM
17 MINOR RESET 0:0:0:3 0:0:0:3
17 WAN1 MAJOR LOF 0:0:9:4 0:0:9:4
18 WAN1 MAJOR LOF 0:0:9:6 0:0:9:6
3 WAN1 MAJOR LOS 0:0:8:35 0:0:8:35
4 WAN1 MAJOR LOF 0:0:8:35 0:0:8:37
5 WAN1 MAJOR LOF 0:0:8:39 0:0:8:39
6 WAN1 MAJOR LOF 0:0:8:41 0:0:8:41
7 WAN1 MAJOR LOF 0:0:8:43 0:0:8:43
8 WAN1 MAJOR LOF 0:0:8:45 0:0:8:45
9 WAN1 MAJOR LOF 0:0:8:47 0:0:8:47
10 WAN1 MAJOR LOF 0:0:8:49 0:0:8:49
11 WAN1 MAJOR LOF 0:0:8:51 0:0:8:51
12 WAN1 MAJOR LOF 0:0:8:53 0:0:8:53
13 WAN1 MAJOR LOF 0:0:8:55 0:0:8:55
14 WAN1 MAJOR LOF 0:0:8:57 0:0:8:57
15 WAN1 MAJOR LOF 0:0:8:59 0:0:8:59
To clear the history alarms, enter the following command:
user> CLEARHALARM