Specifications

Server Cards IMACS System Release 5.1.6 5-19
IPR Card IPR Card Configuration Screens and Settings
Table 5-6. IPR 10B2 and 10BT Frame Relay Menu Option Settings and Defaults
STATE
Activates or disables the Frame Relay port. Options are actv (active), or stdby (standby).
USER
Displays the attached user. This is a display only parameter. Options are n/a.
WAN/SERV
Point to the WAN or Server slot. Options are wan (w1-1 through w4-2), and srv (P1 through
P3).
TS
Can only be set for WAN/SRV case.
RATE
Always 64k.
PORT TYPE
Frame Relay port type. Choices are u-dte, u-dce, nni, frad, none.
Parameter User Options Default
STATE actv stdby stdby
USER n/a n/a
WAN/SRV wan (w1-1 through w4-2) serv (P1 through P3) w1-1
TS 1-24 1-24
RATE 64k 64k
PORT TYPE u-dte u-dce nni none frad none
LMI ansi ccitt lmi none none
DCE PARAM DCE T392 N392 N393 LMI
DTE PARAM DTE T391 N391 N392 N393
ASYNC LMI no yes no
LOOPBACK off line local off