User's Guide

Quick start guide EN 󶚌󶚎
zhiyun-tech.com
After balancing CRANE-M󶚎 SE, the motor torque needs
to be adjusted for proper function. It is recommended
to use“ Auto Calibration” in the touch screen menu
“Motor ”-“ Auto ”.
󶚑. How to Use CRANE-M3 SE
Buttons Description
Trigger Button
Double press: Reposition.
Triple press:
180° rotation for the pan axis motor.
Press and hold: Enter Go Mode. Release
to return to the previous mode.
Type-C Charging/
Firmware Upgrade Port
Charge the gimbal/connect to computer
for firmware upgrade via this port.
Fill Light Switch
Toggle the switch up/down and hold for
󶚍 secs to turn on/off the fill light.
Toggle the switch up once to increase
the fill light brightness, toggle down
once to decrease the fill light brightness
Joystick
Control the gimbal to rotate.
In the menu interface, push the joystick
up/down to scroll up/down the menu,
push left to return to the previous menu,
push right to the next menu.
Filming Button
Single press: Start/stop the filming.
Power Button
Push up and hold for 2s to power on/
off the gimbal.
Menu Button
Single press: Enter/exit display screen
main menu interface.
Double press: Enable/disable gimbal
joystick lock
M Button
Single press:
Switch gimbal modes（PF-L-F）
Double press:
Switch gimbal modes（POV-V）,
single press to return to PF mode.
Press and hold:
Gimbal enter/exit standby mode.
󶚌
󶚍
󶚎
󶚏
󶚐
󶚑
󶚒
󶚓