User's Guide

󶚐. Balancing
Horizontal Balance of the Tilt Axis
Unlock the tilt axis arm ① and loosen the tilt axis latch ②.
Push the camera to move forward or backward ③ until the
camera is steady and is at almost level with the ground ④.
Tighten the latch ⑤.
Vertical Balance of the Tilt Axis
Unlock the tilt axis arm, make the lens face up, loosen the
level mount lock screw ①. Push the whole level mount to
move forward or backward ②. Push until the camera can
stay still with the lens facing up (i.e.the camera stays still
and vertical to the ground) ③. Complete this step by
tightening up the screw ④.
Roll Axis Balance
Unlock the roll axis ①, loosen the roll axis latch ②, push
the roll axis arm to move left or right ③ until the camera
can stay still and horizontal to the ground (as shown
below) ④. Complete this step by tightening up the latch ⑤.
Pan Axis Balance
Unlock the pan axis ①, loosen the pan axis latch ②, hold
and slightly tilt the handle, push the pan axis to move left
or right ③until the pan axis can stay still in any position.
Complete this step by tightening up the pan axis latch ④.
Quick start guideEN 󶚌󶚍
zhiyun-tech.com
①
③
①
②
③
④
⑤
②
②
③
①
④
⑤
①
②
③
④