Quick start guide EN C R ENA- Quick N E start - Mguide S E 17. Camera Control/ 1. Fill Light 2. Level Mount Lock Screw 4. 1/4 Camera Lock Screw Safety Lock 20. Display Screen 7. Pan Axis Lock Switch ZY Play 8. Trigger Button 21. Joystick 9. Wrist Strap Hole 22. Video Filming Button 10. Roll Axis Latch 11. Roll Axis Motor 23. Handle 12. Roll Axis Lock Switch 24. Tilt Axis Latch 13. / "Expansion Port 25. Tilt Axis Motor 14. Type-C Charging / 26.
EN Quick start guide . Installation Mounting the Tripod Lock state for installation Mounting the Camera 1. Expand CRANE-M3 SE. 2. Mount the camera to the CRANE-M3 SE. Lock state for storage zhiyun-tech.
Quick start guide EN 3. Connect the camera control/charging port of the gimbal to the USB port of the camera. When detaching, toggle the quick release plate safety lock to unlock ①, press the quick release plate release button ② to push the whole quick release plate out ③. ① Please select the correct cable corresponding to the USB port type of the camera to connect. For details of supported camera models for CRANE-M SE, please visit the official website of ZHIYUN (www.zhiyun-tech.
EN Quick start guide . Balancing Horizontal Balance of the Tilt Axis Roll Axis Balance Unlock the tilt axis arm ① and loosen the tilt axis latch ②. Push the camera to move forward or backward ③ until the camera is steady and is at almost level with the ground ④. Tighten the latch ⑤. Unlock the roll axis ①, loosen the roll axis latch ②, push the roll axis arm to move left or right ③ until the camera can stay still and horizontal to the ground (as shown below) ④.
Quick start guide EN After balancing CRANE-M SE, the motor torque needs to be adjusted for proper function. It is recommended to use“Auto Calibration”in the touch screen menu “Motor ”-“Auto ”. . How to Use CRANE-M3 SE Buttons Description Fill Light Switch Toggle the switch up/down and hold for secs to turn on/off the fill light. Toggle the switch up once to increase the fill light brightness, toggle down once to decrease the fill light brightness Joystick Control the gimbal to rotate.
EN Quick start guide Display Screen Interface Z Main Page (Default Page) Z CRANE- M SE_XXXX Standby Mode axis lock motor advanced joystick Axis Locked Menu . Connect to“ZY Play”App 1. Power on CRANE-M3 SE and turn on Bluetooth on the mobile phone. 2. Launch the“ZY Play”app. Select the CRANE-M3 SE page and tap to connect. Select the Bluetooth name of your CRANE-M3 SE to connect (the CRANE-M3 SE Bluetooth name can be found on the side of the tilt axis USER ID: XXXX). 3.
Quick start guide EN for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all terms, precautions, practices, policies and guidelines ZHIYUN has made and may make available. ZHIYUN accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. Users shall observe safe and lawful practices including, but not limited to, those set forth herein.
