User's Guide

5
Charging and Battery
The Visual Controller adopts internal built-in battery. When using the Visual Controller
for the first time, please fully charge it to activate the battery.
Charging and Battery
AC power
（100-240V）
USB charger USB-C cable Zhiyun MasterEye
Visual Controller
① When using the Visual Controller and the battery level is less than 10%, the
indicator light will turn red and stay solid.
② Cannot charge external NP-F batteries.
Charging method: Use provided Type-C cable to connect with the USB charger (not
provided) to charge the Visual Controller. It is recommended to use USB chargers
that meet the QC 2.0 or PD policy. (support 16W at most). When the four indicator
lights stay solid and blue, the charging is completed.
Charging time: Approximately 1 hour and 50 minutes (data collected with a 15W
charger that meets the QC2.0 or PD policy and with the environment temperature
of 25℃ . The charging time may vary in other environmental factors and the actual
results may vary as well. When using the 5V/2A charger, the charging time is
approximately 2 hours and 16 minutes.)