User Manual
Table Of Contents
- Packing List
- Get to Know WEEBILL-S
- Preparing and Charging the Batteries
- Charging Procedure
- Installation and Balance Adjustment
- Balance Adjustment
- Camera Control Cable Connection
- Camera Installation
- Battery Installation
- How to Use
- Display Screen Description
- Menu Option Description
- Stabilizer Mode Description
- Motor Torque Adjustment
- Manual Angle Lock
- APP Operations
- Calibration and Firmware Upgrade
- Six-side Calibration
- Stabilizer Firmware Update
- Motor Fine-tuning
- Product Specifications
- Disclaimer and Warning
- Disclaimer and Warning
- Warranty Terms
- Contact Card
23
Min. Standard Max. Remark
Charging Voltage
6.8V - 8.4V
Charging Current
250mA - 3000MA
Output Voltage
(Micro USB port)
- 5V -
Output Current
(Micro USB port)
- 1000mA -
Tilt Mechanical
Range
-132° 314° +182°
Roll Mechanical
Range
-67° 314° +247°
Pan Mechanical
Range
- 360° -
Operation
Temperature
-10℃ 25℃ 45℃
Battery Capacity
One 2600mAh
Two 18650 Li-ion
Batteries
Battery Runtime
- 12h 14h Lab Data 1
Charging Time
- 2.5h - Lab Data 2
Stabilizer Weight
- ≈ 895g -
Quick Release Plate
Weight
- ≈ 120g -
Battery Weight
- ≈ 95g -
Tripod Weight
- ≈ 180g -
Bluetooth
Bluetooth 5.0
Product Model：CR110
Product Specifications
"Lab Data 1": The 12h runtime is concluded via a complete test session in which the
stabilizer is well balanced with ILCE-7RM3 camera with Vario-Tessar T* FE 24-70mm F4
ZA OSS installed. The ambient temperature is 25℃ and it is placed at rest throughout
the test session.
"Lab Data 2": This test is conducted with a 5V/2A rated power adapter at a specified
temperature of 25℃ . The actual charging time varies with environmental factors.
All the data in this guide is gathered from internal experiments of ZHIYUN laboratories.
Under different scenarios, data is different to some extent. Please refer to the actual use
of WEEBILL-S.