User Manual
Table Of Contents
- Packing List
- Get to Know WEEBILL-S
- Preparing and Charging the Batteries
- Charging Procedure
- Installation and Balance Adjustment
- Balance Adjustment
- Camera Control Cable Connection
- Camera Installation
- Battery Installation
- How to Use
- Display Screen Description
- Menu Option Description
- Stabilizer Mode Description
- Motor Torque Adjustment
- Manual Angle Lock
- APP Operations
- Calibration and Firmware Upgrade
- Six-side Calibration
- Stabilizer Firmware Update
- Motor Fine-tuning
- Product Specifications
- Disclaimer and Warning
- Disclaimer and Warning
- Warranty Terms
- Contact Card
22
Stabilizer Firmware Update
Method 1 : Connect the USB port on the stabilizer with a computer via a Type-C USB
cable to conduct the stabilizer firmware update and online calibration.
1. Open ZHIYUN official website www.zhiyun-tech.com. Click "Download"-"Firmware"
on the homepage. Find and download the USB driver and the latest firmware for
your stabilizer model. (For Mac and WIN10, you don't need to download USB driver.)
2. Install the downloaded driver.
3. Power on the stabilizer and enter standby mode.
4. Launch "Zhiyun Gimbal Tools", then conduct firmware update according to the
operations in the firmware update tutorial.
Method 2 : Update via APP. According to the method introduced in "APP Operations",
connect the stabilizer to APP. If a firmware update prompt pops up on APP, please tap
to update.
Before the firmware update, please ensure that the power level of both stabilizer and
phone remain above 50%. Do not exit APP or transfer APP to the background. Please
pay attention to the APP prompt information.
Motor Fine-tuning
According to the method introduced in "APP Operations", please connect the stabilizer
with APP, and enter "Settings" and select "motor calibration", then set the fine-tuning
value of the tilt axis and roll axis according to actual needs.
Calibration and Firmware Upgrade
USB