{tennis « Packing List = Disclaimer and Warning = Battery Safety Guidelines = Quick Start Guide = Control Panel & Start Up # Preparing and Charging the Batteries # Introducing Gimbals Control Modes # Connection Ports & Various Operations = Accessories a Initialization a Off-line Calibration # Product Specifications ® Warranty Card = QR Codes sim whom £3
The product package comes with the following items, In case that any tam is found missing, Thank you for using HYUNDAI EVOLUTION. Tha information contains herein affects your safety and pleas contact HYUNDAI or your local sling agent. your legal rights and responsibilities, Read this entire document carefully to ensure proper configuration before uss. Failure to read and follow the Instructions and warnings herein may result in serious injury to you or bystanders, or damage to your device or property.
i. WARN Disclaimer Read the ENTIRE User Guide to become familiar with the features of this product before ete operating. Fallout to operate the product comely can result In damage to the product or Without notice. For updated product information, please visit Ilyushin's official website. personal property and cause serious Injury. This s a sophisticated product.
Buttery Use Prevent the batteries to coma into contact with any kind of liquid. Do not leave batteries out in the rain or near a source of moisture. Do not drop tha battery into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lad to an explosion. 211 tho pastry fall nt water with the tab ze acing use, ake It out immediately and put it in a safe and open area.
® NOTICE Battery Use Make sure the batteries are fully charged before each time of use. Battery Charging The battery wil stop charging automatically when It Is full. Disconnect the batteries from the charger when fully charged. Battery Storage L Discharge the battery to if it will NOT ba used for over 10 days. This can greatly extend the . 2 The battery enters hibernation mode when voltage gets 100 low. Charge the battery wil bring it out of hibernation.
How to Start Up BE = Control Panel Conrail Pans! introduction = ._ Battery Level Indicator: Indicates current power love Ranter Level with different flashing frequency. Power ON/OFF: Long press 3 sec. to Power ON/OFF. Power ON/OFF Joystick Controls the camera movement and Joystick switches between modes. “= Micro USB Port Mics USB Port: Connect the stabilizer with a computer for firmware upgrade and on-line 3.5mm Video calibration.
= Preparing and Charging the Batteries Before using EVOLUTION for the first time, please fully charge the batteries to activate and ensure normal aeration by using the charger that comes in the package. Names Li-ion battery charger Model: 2-18650 Input: DC 5V 1600mA Output DC 42V 800mA. @ Shines dolls RED light ‘when charging. Shines BLUE light when fully charged. 1 E71 shun godhood Status Indicator Light __ Micro USB Port GV power input) 18650 Li-ion Battery Capacity: 2000mah Voltage: 37V NOTICE 1.
EE Connection Ports & Various Operations Connection Ports & Various Operations Eatery Love Indicator 1 Connect the stabilizer to your computer using the Micro USB cable for firmware upgrade and on-line calibration. 2.Connect the stabilizer to a specialized wired remote commander, = NOTICE “This port cannot ia used for charging. Definition of Battery Level Indicator Status Indicator Status Battery Level Quick flash 4 times Quick fish times Quickfire 2 times Quick flash 1 time.
= Connection Ports 8 Various Operations Accessories FEE Main Operations Re mate Control AC amen Charging: Users can charge the camera by connecting it with the stabilizer via the 1. Application; For wired remote control af charging cable, EVOLUTION. Idea Output {for real-time display monitor) 2. Connection: Connect to the Micro USB port of 1)Power up the stabilizer and connect the stabilizer with the camera using the Video Output 8 the stabilizer. Charging Cable. 3.
Off-line Calibration FEES EE Initialization Initializing the Stabilizer calibration endure Initialize the stabilizer when any of the following circumstances occurs: a)Slight deviation is found in the tit angle of the camera in level position after startup, Q b Slight deviation Is found In the roll angle of the camera In level position after startup. Frequent small angle corm action Is found when the camera is in level potion while the stabilizer stays stl.
Fi Offline Calibration 7.Lay the stabilizer still on a lathery stabilizer steel ana 9.Lay the stabilizer still on a Product Specifications BEE Input Vol 68V 126v surface with the Mobile Clamp surface with the Mable surface with the Mobile Camp Operation Temperature -10'c 25°C 45°C facing up, until the Indicator Clamp facing forward, unt! facing backward, until the starts flashing 5 times each the Indicator starts flashing 6 Indicator shines dolls BLUE. times each second.
