User Manual

22
Motor Fine-tuning
Firmware Upgrade
Fine tune the motor through stabilizer:
1. Power on the stabilizer and enter standby mode, then rotate the dial and
press right to enter the "angle" option;
2. Adjust the value of the tilt and roll axis angle to your actual needs.
Fine tune the motor through APP
Connect the stabilizer to "ZY Play". Enter "Gimbal Settings", and adjust the
value of the tilt and roll axis angle to your actual needs.
Calibration and Firmware Upgrade
"ZY Play" will automatically search for the latest firmware after the stabilizer
is connected. Tap to upgrade automatically.
Before firmware upgrade, please ensure that the power level of both
stabilizer and phone remain above 50%. Do not turn off the stabilizer
during upgrade.