User Manual

The Use of Stabilizer

⓬

Video Button [ ]

Single press to start or stop recording.

⓭

Mode Switch Button

●

Push slider up to enter PF(Pan Following) Mode;

●

Push slider down to enter L(Locking) Mode.

⓮

Power Button [ ]

Press the button for 2 seconds to turn on/off the

stabilizer;

⓯

Battery Level Indicator

●

The button shows how much power is left.

●

0~25%: one blue light;

●

25~50%: two blue lights;

●

50~75%: three blue lights;

●

75~100%: four blue lights.

⓰

“PhoneGo” Mode Button - Full-speed Following

Mode Button

When pressing this button, the stabilizer enters Full-

speed Following Mode - “PhoneGo”. Smooth 4 can

then follow your move synchronously at full speed.

⓱

Following Mode Button

●

When pressing the button, the stabilizer enters

following mode;

●

When double pressing the button, the tilt axis

motor and roll axis motor go back to initial state.

1. In standby mode, the stabilizer can still adjust

phone camera parameters;

2. Part of the function buttons mentioned

above can only be used when the stabilizer is

connected to "ZY Play" App in the phone.