User Manual

29 zhiyun-tech.com
CRANE PLUS Firmware V1.52 and above supports parameter setting for motor force. Users can set the
motor force to adapt to cameras with different weights via the calibration upgrade tool or the app.
Setting process
Adjustment method 1 :The motor force of the stabilizer needs to be adjusted (3 levels) to adapt the
stabilizer to cameras and lens of different weight for ideal use. Please refer to the connection way
on the APP introduction, firstly connect the Crane by ZY PLAY, then choose the suitable strength to
set up the motor force in ZY PLAY correctly.
Adjustment method 2 :
1. Download the calibration upgrade tool and USB driver from Zhiyun official website. Double click
to install USB driver.
2. Connected gimbal and PC by USB cable, double-click Tool to run Tool. Power on gimbal, press
and hold Mode button for seconds, gimbal enter to standby mode.
3. Click “Setting” to enter to parameter setting page. Click “Open”, Users can set motor power in
Other Module.
4. Motor power have low, medium and high three options.
Low: Default setting ( recommend : CRANE PLUS + Sony A7S or below weight)
Medium: Moderate setting ( recommend : CRANE PLUS + Sony A7S)
High: Maximum setting ( recommend :CRANE PLUS + Canon 5D)
Operation guide on motor torque adjustment