User Manual

25 zhiyun-tech.com
Mounting Method
1. Loosen the thumb screw on the
back of the remote controller to let
loose of the rubber case (as marked
red in the Figure).
2. Install the remote controller to the extension rod or
dual handle for convenient operations (as shown in
the Figure above). Fasten up by tightening the thumb
screw on the back.
The remote controller turns off automatically when left idle for 2 minutes.
Specifications:
Charging voltage: 5V
Charging current: 100mA
Theoretical work time: ≥30 hr.
Built-in Polymer lithium battery capacity: 150mAh
Emission and received current: 11.9mA
Operating current: 4.2mA
Effective control distance: 10m /394 inch
(without blockage)
Bluetooth Indicator
No connection: Continuous flashing.
Connected: Shines solid light.
Power Level Indicator
90%-100%: quick flash for 4 times each second.
75%-90%: quick flash for3 times each second.
55%-75%: quick flash for2 times each second.
30%-55%: quick flash for1 time each second.
0%-30%: quick flashing.
Charging Indicator
Charging:
●
RED light.
Charging complete:
●
GREEN light.
Usage of Main Accessories