User Manual

23 zhiyun-tech.com
Sony Camera Control Line
Applicable camera models :
Compatible with SONY cameras controlled by
MULTI port.
Compatible Stabilizer Model(s):
CRANE / CRANE-M / CRANE PLUS with firmware
version of V1.50 and above.
Operations
1. Shutter control (including focusing): Press the
Power Button to take single shots.
2. Video recording: Double press the Power Button
to start video recording, and double press again
to stop recording.
3. Zooming: Push the Shifter Lever on the stabilizer
handle in T direction to zoom out or W direction
to zoom in.
Usage of Main Accessories
Supported Functions:
1.Shutter control
2.Video recording
3.Zooming
NOTICE: Optical zooming is not supported in case of non-electrical lenses (Recommended electrical
zoom lenses: E PZ 18-105mm F4 GOSS, E PZ 16-50mm F3.5-5.6 OSS).
How to Use
Connection
1. Firstly, connect the stabilizer to your PC or smart phone.
2. Configure the stabilizer to suits "Sony" in Gimbal Setting Screen, then save the settings.
3. Connect the Micro USB plug of the SONY camera control line to the camera connection port on
the side of the tilt motor, and then connect the other end of the control line to the MULTI port
on the camera.
4. Power on the stabilizer before turning on the camera, otherwise camera remote control may not
work