User Manual

14zhiyun-tech.com
Control Panel Introduction
Battery Level Indicator
Shines YELLOW light when the stabilizer is Pow-
ered on/off:
Quick flash for 3 sec. and shines solid for 1 sec.
when powered on. Quick flash for 3 sec. when
powered off.
Shines BLUE light when the stabilizer is in normal
operation, the flashing frequency of the BLUE
light indicates the current battery level:
Quick flash 4 times for battery level of 75%-100%.
Quick flash 3 times for battery level of 50%-75%.
Quick flash 2 times for battery level of 25%-50%.
Quick flash 1 time for battery level of 0%-25%.
Shifter Lever Operation
In the event when a SONY camera is connected:
Push the Shifter Lever in T direction to zoom out,
and in W direction to zoom in.
In the event when a Panasonic camera is connect-
ed: Move the Shifter Lever to either direction for
focusing.
Micro USB Port
Connects the stabilizer to a computer through a
Micro USB cable for on-line
Mode Button
Press for 1 second to enter or exit standby mode.
Single press to switch between pan-following and
lock mode.
Quick double press to enter the following mode.
Quick triple press to enter the selfie mode
(180°rotation on pan axis)
Power ON/OFF
Power on the stabilizer by pressing the Power
button for about 3 sec.
After the stabilizer is powered on, the Power but-
ton can be used for camera shooting control (only
after the camera is connected to the stabilizer).
Single press the button to take photos.
Double press the button to start video recording.
Double press the button again to stop recording.
Joystick Operation
Joystick controls the camera movement by turn-
ing the 3 axes up/down or left/right.
Joystick
Mode Button
Battery Level
Indicator
Power ON/OFF
Shifter Lever
Start Up