Compatibility Guide

-6-
WEEBILL-2 Camera Compatibility List
Camera
Model
Photo Video
Live
Preview
Shutter Speed
Adjustment
Aperture
Adjustment
ISO Adjustment EV Adjustment
Electronic
Zoom
Halfway
Press
Shutter
Button to
Autofocus
Electronic
Follow
Focus
(Focus
Wheel)
HDMI
Cable
Type
Camera Control Cable
Type
Camera
Firmware
Version
Note
Save Playback Save Playback
Photo
Mode
Video
Mode
Photo
Mode
Video
Mode
Photo
Mode
Video
Mode
Photo
Mode
Video
Mode
Olympus
OM-D
E-M1 Mark
II"
Type-C to Type-C USB V3.1
1. After connecting cameras to the
stabilizer, there will be a prompt on
camera screen for you to choose
USB mode. Please choose [ ]
(PC control) and turn camera mode
dial to P, A, S, or M mode.
Fujifilm
X-T3
√ √ √ √ - √ - - - √ √ - - - √ - Type-C to Type-C USB V3.10
1. Please set the "connection mode"
into "USB TETHER shooting auto" for
camera connection settings.
2. In Photo mode of Fujifilm, camera
parameter control from camera is
disabled and you can only adjust
camera parameters via stabilizer.
Press LV button of stabilizer to
resume parameter control of your
camera and press LV button again
to return to stabilizer control; Fujifilm
doesn't support saving photos in
RAW format.
Fujifilm
X-T4
√ √ √ √ - √ - - - √ √ - - - √ - - Type-C to Type-C USB V1.01
Fujifilm
X-T30
- - - - - - - - - - - - - - - - Type-C to Type-C USB V1.30
ZCAM E2
- - √ √ - - - - - √ √ - - - - - - Type-C to Type-C USB V0.93
1. Set the camera's "USB Connect" into
"serial".
BMPCC 4K
- - √ √ - - √ - √ - √ - - - - √ - Type-C to Type-C USB V7.3
BMPCC 6K
- - √ √ - - √ - √ - √ - - - - √ - Type-C to Type-C USB V6.9.1
SIGMA fp
√ - √ - - - - - - - - - - - √ - - Type-C to Type-C USB V2.00
Note：
1. This table will be updated in line with firmware update and is subject to change without prior notice;
2. For Sony cameras, after connecting stabilizer and camera with control cable, Please first power on the stabilizer and then the camera. Make sure the camera has sufficient power to operate. Optical zoom control is available on the stabilizer when used with motorized lens. Digital zoom
control is available on the stabilizer when used with non-motorized lens. Please select zoom option in your camera's settings;
3. When shooting Panorama or Timelapse, it is recommended to turn off the camera's auto review (Sony), image confirmation (Canon), auto review (Panasonic), image review (Nikon) to reduce system latency.
4. The Canon DSLR cannot realize the halfway press shutter button to autofocus in Live Preview. If the feature is used, the camera Live Preview mode should be turned off.
5. Before connecting Panasonic G9 with a control cable, please first turn off the USB Power Supply in camera settings.
6. When connecting an Olympus camera to the stabilizer, USB Mode will automatically pops up on the camera. Please select [ ] (PC (Tether）) and dial the mode to P, A, S, or M mode.
7. In Photo mode of Fujifilm X-T3, camera parameter control from camera is disabled and you can only adjust camera parameters via stabilizer. Press LV button of stabilizer to resume parameter control of your camera and press LV button again to return to stabilizer control.
8. "√" means the camera can realize the function after connecting to the stabilizer; "×" means the camera currently cannot realize the function after connecting to the stabilizer, but there're possibilities that the function may open by a firmware update or other ways. "-" means the
uncontrollable functions after connecting to the stabilizer is because the camera control protocol is not opened.