User Guide
Table Of Contents
- Product List
- Get to Know SMOOTH-Q3
- Battery Charging Instruction
- Installation and Balance Adjustment
- Stabilizer Mode Description
- Indicator Lights and Buttons Description
- Balancing the Phone
- How to Use
- Standby Mode
- Manual Angle Lock
- How to Use the App
- Main App Features
- Calibration and Firmware Upgrade
- Six-side Calibration
- SMOOTH-Q3 Firmware Upgrade
- Motor Fine-Tuning
- Product Specifications
- Disclaimer and Warnings
- Safe Operation Guidelines
- Warranty Card
- Contact Card
15
How to Use
Manual Angle Lock
Under pan follow mode, lock mode and follow mode, rotate the smartphone to a
certain angle by hand for 2 seconds and release it. The smartphone will be fixed at
that angle.
Can only adjust the tilt axis and the pan axis. Please rotate the device with the
proper amount of strength.
Standby Mode
• When the SMOOTH-Q3 stabilizer is powered on, rotate the roll axis or tilt axis
manually to its fixing buckle. The SMOOTH-Q3 will then enter Standby Mode
automatically. Unlock the fixing buckle of the roll axis and tilt axis to wake the
SMOOTH-Q3.
• The SMOOTH-Q3 automatically enters Standby Mode if the vertical arm is
retracted and the contact points are separated when the device is on. When
the vertical arm is extended and there is contact with the contact points, the
SMOOTH-Q3 will resume operation.