Compatibility Guide

-2-
CRANE 3S Camera Compatibility List
Note：
1. This table will be updated in line with firmware update and is subject to change without prior notice;
2. For Sony cameras, after connecting stabilizer and camera with control cable, Please first power on the stabilizer and then the camera. Make sure the camera has sufficient power to operate. Optical zoom control is available on the stabilizer when used with motorized lens. Digital
zoom control is available on the stabilizer when used with non-motorized lens. Please select zoom option in your camera’s settings;
3. With Panasonic cameras, please choose PC (Tether) for your camera’s USB mode;
4. When shooting Panorama or TimeLapse, it is recommended to turn off the camera's auto review (Sony), image confirmation (Canon), image review (Nikon) to reduce system latency.
5. The Canon DSLR cannot realize the halfway press shutter button to autofocus in Live Preview. If the feature is used, the camera Live Preview mode should be turned off.
6. Before connecting Panasonic G9 with a control cable, please first turn off the USB Power Supply in camera settings.
7. When connecting an Olympus camera to the stabilizer, USB Mode will automatically pops up on the camera. Please select [ ] (PC (Tether）) and dial the mode to P, A, S, or M mode.
8. In Photo mode of Fujifilm, camera parameter control from camera is disabled and you can only adjust camera parameter via stabilizer. Press LV button of stabilizer to resume parameter control of your camera and press LV button again to return to stabilizer control; Fujifilm doesn't
support saving photos in RAW format.
9. The "Real-time Preview" feature is for user to switch between electronic viewfinder and optical viewfinder in DSLR by single-clicking the LV button of the stabilizer.
10. For Canon mirrorless cameras, switch the shooting mode to photo mode before taking photos. When shooting a video is needed, switch the shooting mode to movie mode. Please turn off your camera before switching modes. For EOS R/RP/R5/R6, shutter release can't be used to
control video shooting in photo mode otherwise the camera may freeze. (In this case please take out the camera batteries and reinstall and turn on the camera again)
11. “√” means the camera can realize the function after connecting to the stabilizer; “×” means the camera currently cannot realize the function after connecting to the stabilizer, but there’re possibilities that the function may open by a firmware update or other ways. “-” means the
uncontrollable functions after connecting to the stabilizer is because the camera control protocol is not opened.
Camera Model
Photo Video
Live Priview
Shutter Speed
Adjustment
Aperture
Adjustment
ISO Adjustment EV Adjustment
Electronic
Zoom
Halfway Press Shutter Button to
Autofocus
Electronic
Follow
Focus(Focus
Wheel)
Camera Control Cable Type
Camera
Firmware
Version
Note
Save Playback Save Playback
Photo
Mode
Video
Mode
Photo
Mode
Video
Mode
Photo
Mode
Video
Mode
Photo
Mode
Video
Mode
Nikon D850 √ √ √ √ √ √ √ √ √ √ √ √ √ - √ √ Type-C to Micro USB V1.11
1. When using electronic focusing, the camera
lens should be in A(AF) mode and select AF-S
or AF-C in focusing mode.
Nikon D780 √ √ √ √ √ √ √ √ √ √ √ √ √ - √ √ Type-C to Micro USB V1.01
Nikon Z5 √ √ √ √ - √ √ √ √ √ √ √ √ - √ √ Type-C to Type-C USB V1.00
Nikon Z6 √ √ √ √ - √ √ √ √ √ √ √ √ - √ √ Type-C to Type-C USB V3.00
Nikon Z6 II √ √ √ √ - √ √ √ √ √ √ √ √ - √ √ Type-C to Type-C USB V1.00
Nikon Z7 √ √ √ √ - √ √ √ √ √ √ √ √ - √ √ Type-C to Type-C USB V2.00
Nikon Z7 II √ √ √ √ - √ √ √ √ √ √ √ √ - √ √ Type-C to Type-C USB V2.00
Nikon Z50 √ √ √ √ - √ √ √ √ √ √ √ √ - √ √ Type-C to Micro USB V1.00
OLYMPUS OM-D √ √ √ √ - √ √ √ √ √ √ √ √ - √ √ Type-C to Type-C USB V3.1
FUJIFILM X-T3 √ √ √ √ - √ - - - √ √ √ - - √ - Type-C to Type-C USB V3.21
1. In Connection Setting, set " CONNECTION
MODE" into "USB TETHER SHOOTING AUTO".
FUJIFILM X-T4 √ √ √ √ - √ - - - √ √ √ - - √ - Type-C to Type-C USB V1.01
FUJIFILM X-T30 - - - - - - - - - - - - - - - - Type-C to Type-C USB V1.30
When connecting the camera to the gimbal,
please power on the gimbal first and connect
the camera control cables before powering on
the camera.
Sigma fp √ √ √ √ - - - - - - - - - - √ - Type-C to Type-C USB V2.00
BMPCC 4K - - √ √ - √ √ √ √ √ √ - - - - √ Type-C to Type-C USB V6.9.1
BMPCC 6K - - √ √ - √ √ √ √ √ √ - - - - √ Type-C to Type-C USB V6.9.1
ZCAM E2 🄲
- - √ √ - - - - √ - √ - - - - - Type-C to Type-C USB V0.98.0
1. Set the camera's "USB Connect" into
"serial".
ZCAM E2 - - √ √ - - - - √ - √ - - - - - Type-C to Type-C USB V0.95
ZCAM E2 F6 - - √ √ - - - - √ - √ - - - - - Type-C to Type-C USB V0.95
Canon C200 - - √ √ - - - - - - - - - - - - Type-C to φ2.5mm Plug (optional) V1.0.2.1.00
Select“RC-V100(REMOTE A)”for the remote
control connector in System Settings
Canon C300 - - √ √ - - - - - - - - - - - - Type-C to φ2.5mm Plug (optional) V1.1.0.1.00
Sony FS5 - - √ √ - - - - - - - - - - - - Type-C to φ2.5mm Plug (optional) V1.01
Sony FS7M2 - - √ √ - - - - - - - - - - - - Type-C to φ2.5mm Plug (optional) V1.22
Sony FX9 - - √ √ - - - - - - - - - - - - Type-C to φ2.5mm Plug (optional)
Sony Z280 - - √ √ - - - - - - - - - - - - Type-C to φ2.5mm Plug (optional) V1.10