Product Manual

3. Product Manual
3.7 End the work
End glass cleaning, the product will return to the start
position, the beep sounds.
1 Remove the product
Grip the product handle, press
about 5 seconds, the fan stops
working, then remove the host
from window. Use a dry cloth to
gently wipe off the mark on the
glass.
2 Power off
Open the lower cover and turn off
the power switch.
3 Disconnect power
Remove the safety clip and
disconnect the power supply.
4 Clean Walking Belt
When cleaning the cloth and bottom components, unplug the
power and turn off the host.
In the case of pause, the direction
of the product can be controlled
by the direction key on the remote
control, and the work route of the
product can be switched.
( machine no longer memorize the
precious route)
3. Product Manual
I
Clean the walking belt with a
wet cloth.