Product Manual

3. Product Manual
4 Start working
Automatic Mode:
There are two ways to start the work:
Press the button on the host or
the button on the remote control,
all can start the automatic mode.
N Mode:
Operation via remote control mode
key N key: for vertical glass, the
product to "N" route to work.
Z Mode:
Start the work by the remote control
mode key Z key: for horizontal
glass, the product to "Z" route to
work.
3. Product Manual
Manual Mode:
Use a remote control to control
the operation of the machine and
the up,down, left and right.
Among:
Up and down keys are forward /
backward. Right and left keys to
adjust the machine direction.
3.6 Product pause
In the process of working, by host
or remote control to pause,
need to restore work, again press
,machine is shipped according
to the original route.
3 Secure placement
Make sure the product is in the
normal operating state, place it
on the glass surface, make sure
the product is completely
adsorbed on the glass, then
release the handle.
If there is an immovable
obstacle (such as a guard rail,
furniture, etc.) in front of the
window, then the window and
obstacle spacing greater than
15cm can use this product.
Glass
Rail