Product Manual

Disassemble the power line end
of the product and the power
line of the adapter, connect both
ends of the extension line to the
power line end of the product's
power supply line and the
adapter power line, and tighten
up the power line at the end of
the power supply line and the
adapter.
Note:Suction cup direction for use
1. The suction cup can only be used on the surface
of dry and clean glass; other surfaces such as walls
and desktops cannot be used.
2. Slowly press firmly onto the glass surface with
the suction cup handle separated, lift the handle,
and close the suction cup handle together.
3. Please confirm that the suction cup is firmly
adsorbed before use.
4. It is recommended that the suction time of the
suction cup on the glass should not exceed 2 hours.ss
when the suction handle is separated.
A. Safety Rope B. Suction Cup
3. Product Manual
3.3 Connect the adapter
3.4 Assemble the safety rope assembly
When using this product to wipe the glass, use a safety rope assembly
to secure the product and improve the safety of the product.
3. Product Manual
3.5 Product work
1 Connect the power supply
and make sure the machine is
locked by the metal locking.
Do not disconnect the power
supply while the product is
running. Otherwise, the
product may fall down.
2 Turn on the power switch
Keep the machine away from
hair or other small objects, in
case those little things block
the fan.
1
1.Press the power switch cover (below).
2.Connect the safety rope assembly. Connect the end of the safety rope with the buckle
to the metal ring, and the suction cup is firmly fixed in place.