Product Manual

3. Product Manual
3.1 Precautions before use
It is strictly forbidden to use
this product on framed glass
with a thickness of the border
(height difference from the
glass surface to the bezel) of
less than 5 mm.
Use this product in a framed
or frameless ratio of ≥
60 * 60 cm
If there is too much dust on
the surface of the glass, wipe
out a clean area of product
size before using the product
for product adsorption.
Before use, spray a small amount of water on the cleaning cloth and
place it on the surface of the glass.Please do not spray too much water
on glass surface or on the product.
Place two small cloth evenly on
the left and right sides of the
machine.
Place the square cloth evenly on
the middle of the machine.
3. Product Manual
When the product is working on a horizontal glass surface, the
remote control should be used to control the operation of the product.
If you use this product on windows that are not completely vertical,
the product may not work normally. Make sure that you are in the
side care area and, if necessary, assist the product.
This product can not be used
in the inverted case.
3.2 Install the cleaning cloth
6
6